swiftvast.blogg.se - Merkury smart home control kit

You must ensure that you have this option selected to 2.4GHz. You should be able to find an option for changing your Wi-Fi network band. Under these settings, make your way to Wi-Fi settings. To do this, all you have to do is to access your router’s settings. So, be sure to keep that in mind when you’re struggling with the basic setup. Needless to say, you can easily swap between a 2.4GHz/5GHz network whenever you want. While Google Home fully supports the use of a 5GHz network, you might not be able to have much luck with the Merkury smart bulb as it only supports 2.4GHz. It is not a rare issue, and you will have to tweak some configurations to get ahead of these errors.

They will make your life much easier, and you will not have to struggle with these errors yourself.Īfter setting up your Merkury Smart bulb, you may notice issues with the connectivity if you are currently connected to a 5GHz Wi-Fi network. You can also ask other users on the community forums to guide you through the intricate details of the setup. Likewise, you may need to set up a hub or bridge as well.It can take a bit of time to manage all of the intricate details, but you’re not left with many options here. Similarly, it is important to mention how there will be certain instructions that you might have to follow on-screen.įor configuring the light bulb itself, you will have to refer to the Merkury smart bulb user guide, which should have instructions on how you can do so.

Once your light has successfully been set up, choose Done.Īfter going through these steps, you should be able to successfully control your smart lights through both your speaker as well as the display.

You should get a prompt about setting up your smart lights, during which your bulb might blink a couple of times.

This is why we recommend not adding a name similar to your room name, as it can interfere with the voice commands. Keep in mind that you will be using this particular name to call your light bulb through voice commands. To create a custom room, go to “ Add a custom room,” where you will be prompted to enter the room name.

You will have to choose the room where your light bulb is located.

Once you choose, the light bulb should start blinking.

Now, select the light bulb that you’d like to configure with your Google Home.

Click on Add +, found at the top left corner, and choose Set Up Device, followed by Work with Google.

Open your Google Home app on the phone.

Ensure that you have set up your speaker or display.

Start with plugging the smart bulb in the same room as your Google Nest or Home speaker.To configure your light bulbs with Google Home, follow these steps: You just need to make sure that the power connection to the bulb is optimal and that there are no issues with the main power supply.įrom there, you can proceed with the setup accordingly without worrying about any complications down the road. Using this article, we will be explaining the whole process in a simple step-by-step manner.